Provides access to archive, stored on camera. More...

#include <camera_plugin.h>

Inheritance diagram for nxcip::DtsArchiveReader:

Public Types
enum	Capabilities { reverseGopModeCapability = 0x01, skipFramesCapability = 0x02, motionDataCapability = 0x04 }

Public Member Functions
virtual unsigned int	getCapabilities () const =0
	Returns bit mask with supported capabilities.

virtual int	open ()=0
	Initialize connection to archive. More...

virtual StreamReader *	getStreamReader ()=0
	Returns stream reader. More...

virtual UsecUTCTimestamp	startTime () const =0
	Returns timestamp (usec (microseconds) since 1970-01-01, UTC) of oldest data, present in the archive. More...

virtual UsecUTCTimestamp	endTime () const =0
	Returns timestamp (usec (microseconds) since 1970-01-01, UTC) of newest data, present in the archive. More...

virtual int	seek (unsigned int cSeq, UsecUTCTimestamp timestamp, bool findKeyFrame, UsecUTCTimestamp *selectedPosition)=0
	Seek to specified posiition in stream. More...

virtual int	setReverseMode (unsigned int cSeq, bool isReverse, UsecUTCTimestamp timestamp, UsecUTCTimestamp *selectedPosition)=0
	Set playback direction (forward/reverse) More...

virtual bool	isReverseModeEnabled () const =0
	Returns true if reverse mode is currently on.

virtual int	setMotionDataEnabled (bool motionPresent)=0
	Toggle motion data in media stream on/off. More...

virtual int	setQuality (MediaStreamQuality quality, bool waitForKeyFrame)=0
	Select media stream quality (used for dynamic media stream adaptation) More...

virtual int	playRange (unsigned int cSeq, UsecUTCTimestamp start, UsecUTCTimestamp endTimeHint, unsigned int step)=0
	Play time range [start; end) skipping frames. More...

virtual void	getLastErrorString (char *errorString) const =0
	Returns text description of the last error. More...

Public Member Functions inherited from nxpl::PluginInterface
virtual void *	queryInterface (const nxpl::NX_GUID &interfaceID)=0
	Cast to type, specified by interfaceID. More...

virtual int	addRef () const =0
	Increment reference counter. More...

virtual int	releaseRef () const =0
	Decrement reference counter. More...

Detailed Description

Provides access to archive, stored on camera.

Implements methods to manage (seek, select playback direction, select stream quality) archive playback.

Media stream is provided by nxcip::StreamReader instance returned by nxcip::DtsArchiveReader::getStreamReader().

cSeq (command sequence counter): Methods DtsArchiveReader::seek, DtsArchiveReader::setReverseMode, DtsArchiveReader::playRange accept cSeq value which they MUST use in every media packet generated in response to this command

It is not required, that archive contains data from all encoders

Note: By default, archive is positioned to the beginning, quality set to high and playback direction is forward; Methods of this class can be called in thread different from thread calling StreamReader::getNextData()

Member Enumeration Documentation

◆ Capabilities

enum nxcip::DtsArchiveReader::Capabilities

Enumerator

reverseGopModeCapability

Signals that reverse playback by GOP (group of picture) reordering is supported.

Plugin MAY support backward playback by GOP (group of picture) reordering. If this is not supported, reverse playback is emulated by server.
This capability is not required but can increase performance.
Reverse gop playback is organized in following way:
Assume, we have media stream consisting of 6 gop:

------ ------ ------ ------ ------ ------
|GOP1| |GOP2| |GOP3| |GOP4| |GOP5| |GOP6|
------ ------ ------ ------ ------ ------

To be able to play it in reverse mode, plugin passes GOPs in reverse mode (RB is "reverse block"):

------ | ------ | ------ | ------ | ------ | ------
|GOP6| | |GOP5| | |GOP4| | |GOP3| | |GOP2| | |GOP1|
------ | ------ | ------ | ------ | ------ | ------
  RB1  |   RB2  |   RB3  |   RB4  |   RB5  |   RB6

Reverse block can consist of multiple GOP. E.g.:

------ ------ | ------ ------ | ------ ------
|GOP5| |GOP6| | |GOP3| |GOP4| | |GOP1| |GOP2|
------ ------ | ------ ------ | ------ ------
     RB1      |      RB2      |      RB3

each packet in this stream MUST contain MediaDataPacket::fReverseStream flag
first packet of each GOP MUST be key-frame and contain MediaDataPacket::fKeyPacket flag
first packet of each RB MUST contain MediaDataPacket::fReverseBlockStart flag

Such stream is played by decoding the whole RB and then playing decoded frames in reverse order

Note: Frames within each GOP MUST be in their original order (i.e., decoding order); Once again, this is an optional functionality for plugin

skipFramesCapability

frame skipping with DtsArchiveReader::setSkipFrames method is supported

Note: This funtionality is optional. Helps for better performance

motionDataCapability

motion data can be provided in media stream

Member Function Documentation

◆ endTime()

virtual UsecUTCTimestamp nxcip::DtsArchiveReader::endTime ( ) const

pure virtual

Returns timestamp (usec (microseconds) since 1970-01-01, UTC) of newest data, present in the archive.

This value can be changed at any time (if record is ongoing)

Implemented in ArchiveReader.

◆ getLastErrorString()

virtual void nxcip::DtsArchiveReader::getLastErrorString ( char * errorString ) const

pure virtual

Returns text description of the last error.

Parameters

[out] errorString Buffer of size MAX_TEXT_LEN

Implemented in ArchiveReader.

◆ getStreamReader()

virtual StreamReader* nxcip::DtsArchiveReader::getStreamReader ( )

pure virtual

Returns stream reader.

DtsArchiveReader instance holds reference to returned StreamReader instance

Implemented in ArchiveReader.

◆ open()

virtual int nxcip::DtsArchiveReader::open ( )

pure virtual

Initialize connection to archive.

Returns: zero on success, error code in case on failure. Use DtsArchiveReader::getLastErrorString to get error description

Implemented in ArchiveReader.

◆ playRange()

virtual int nxcip::DtsArchiveReader::playRange	(	unsigned int	cSeq,
		UsecUTCTimestamp	start,
		UsecUTCTimestamp	endTimeHint,
		unsigned int	step
	)

pure virtual

Play time range [start; end) skipping frames.

Tells to skip media packets for inter-packet timestamp gap to be at least step usec (microseconds). When frame skipping is implied, audio packets SHOULD not be reported

Parameters

[in]	cSeq	New value of command sequence counter
	start	Position to seek to
	endTimeHint	Used to hint implementation that packets with greater timestamp are of no interest. Implementation MAY NOT cache (if it does) data with greater timestamp
	step	If 0, no frames MUST be skipped

Note: Used only if DtsArchiveReader::skipFramesCapability is set; If frame skipping is enabled only key frames SHOULD be provided by StreamReader::getNextData call; This is used to generate thumbnails; This funtionality is optional

Implemented in ArchiveReader.

◆ seek()

virtual int nxcip::DtsArchiveReader::seek	(	unsigned int	cSeq,
		UsecUTCTimestamp	timestamp,
		bool	findKeyFrame,
		UsecUTCTimestamp *	selectedPosition
	)

pure virtual

Seek to specified posiition in stream.

Implementation is allowed to jump to frame with timestamp next to requested (i.e., lower_bound algorithm is implied to find frame)

Parameters

[in]	cSeq	New value of command sequence counter
[in]	timestamp	timestamp to seek to
[in]	findKeyFrame	If true, MUST jump to key-frame only (selected frame timestamp MUST be equal or less than requested)
[out]	selectedPosition	Timestamp of actually selected position

Returns

NX_NO_ERROR on success
NX_NO_DATA if timestamp is greater than timestamp of the last frame of the archive (in case of if forward play) and if timestamp is less than timestamp of the first frame of the archive (in case of reverse play)

Note: This funtionality is required

Implemented in ArchiveReader.

◆ setMotionDataEnabled()

virtual int nxcip::DtsArchiveReader::setMotionDataEnabled ( bool motionPresent )

pure virtual

Toggle motion data in media stream on/off.

Returns: NX_NO_ERROR on success, otherwise - error code

Note: This funtionality is optional

Implemented in ArchiveReader.

◆ setQuality()

virtual int nxcip::DtsArchiveReader::setQuality	(	MediaStreamQuality	quality,
		bool	waitForKeyFrame
	)

pure virtual

Select media stream quality (used for dynamic media stream adaptation)

Media stream switching may not occur immediately, depending on waitForKeyFrame argument

Parameters

[in]	quality	Media stream quality
[in]	waitForKeyFrame	If true, implementation SHOULD switch only on reaching next key frame of new stream. If false, StreamReader instance SHOULD switch immediately to the key frame of new stream with greatest pts, not exceeding current

Returns: NX_NO_ERROR on success (requested data present in the stream). Otherwise - error code.
If requested quality is not supported, NX_NO_DATA is returned

Note: nxcip::msqDefault MUST always be supported; This funtionality is optional

Implemented in ArchiveReader.

◆ setReverseMode()

virtual int nxcip::DtsArchiveReader::setReverseMode	(	unsigned int	cSeq,
		bool	isReverse,
		UsecUTCTimestamp	timestamp,
		UsecUTCTimestamp *	selectedPosition
	)

pure virtual

Set playback direction (forward/reverse)

If timestamp is not equal to INVALID_TIMESTAMP_VALUE, seek is performed along with playback direction change

Parameters

[in]	cSeq	New value of command sequence counter
[in]	isReverse	If true, playback
[in]	position	if not INVALID_TIMESTAMP_VALUE, playback SHOULD jump to this position (with rules, defined for DtsArchiveReader::seek)
[out]	selectedPosition	Timestamp of actually selected position

Note: This method is used only if DtsArchiveReader::reverseModeCapability is supported

Returns: NX_NO_ERROR on success, otherwise - error code

Note: This funtionality is optional; If end-of-stream reached with reverse mode, packets of type dptEmpty MUST have flag MediaDataPacket::fReverseStream set

Implemented in ArchiveReader.

◆ startTime()

virtual UsecUTCTimestamp nxcip::DtsArchiveReader::startTime ( ) const

pure virtual

Returns timestamp (usec (microseconds) since 1970-01-01, UTC) of oldest data, present in the archive.

This value can be changed at any time (if record is ongoing)

Implemented in ArchiveReader.

The documentation for this class was generated from the following file:

src/camera/camera_plugin.h

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

◆ Capabilities

Member Function Documentation

◆ endTime()

◆ getLastErrorString()

◆ getStreamReader()

◆ open()

◆ playRange()

◆ seek()

◆ setMotionDataEnabled()

◆ setQuality()

◆ setReverseMode()

◆ startTime()